Courses Search and Views Navigation
January 2022
IOSH Managing Safely General
IOSH Managing Safely is an excellent risk management based health and safety course which is suitable for all working environments. It is delivered one day per week for three weeks and covers; The foundations of health and safety Hazard identification The risk assessment process from start to finish Risk control, covering the hierarchy of risk control Overview of current legislation Understanding the implications of common hazards in the workplace. Accident investigation Measuring performance. Safety in the workplace is not…
Find out more »City & Guilds PAT 2377-77
Coming into contact with live electricity is a very serious hazard which could result in a fatality. The Health and Safety at Work (NI) Order 1978 places a legal duty on employers to provide safe and properly maintained work equipment. Regulation 5 of the Provision and Use of Work Equipment Regulations 1998 states; (1) Every employer shall ensure that work equipment is maintained in an efficient state, in efficient working order and in good repair. (2) Every employer shall ensure…
Find out more »CSR 1 Day Health & Safety
The CSR scheme aims to raise health and safety standards and reduce risks and accidents in the construction industry, by assuring that all construction employees undertake health and safety training every four years. Applicants receive a photographic identity card which provides proof of their health and safety training and their skills and qualifications if appropriate. All applicants must undertake health and safety training and skills assessment if applicable. Please contact Donna or Josie for further information. Training Solutions backs up…
Find out more »Site Safety Supervisor Refresher
This is a one day course for supervisors and managers that need to renew their Supervisors CSR Card. On completion of the course we can apply to CEF for the issue of a new CSR Supervisors Card As part of the course you will have to complete the Health Safety and Environment test for Supervisors. We have the facilitate to complete that on the day at our premises. You must ensure that your card is no longer than six months expired…
Find out more »ILM Train the Trainer – 3 Day
ILM Endorsed Train the Trainer is an excellent course for those who deliver in-house training. Following satisfactory completion of this three day course programme, the delegates will be able to: • Be aware of the learning process • Be able to fill the role of a workplace trainer • Appreciate the value of communication skills • Communicate in a variety of ways • Be able to undertake task analysis • Attain the requisite techniques for job instruction • Be capable…
Find out more »ILM Endorsed Manual Handling Instructors – 5 Day
ILM Endorsed Manual Handling Instructor is an excellent course for those who deliver in-house training. Following satisfactory completion of this three day course programme, the delegates will be able to: • Be aware of the learning process • Be able to fill the role of a workplace trainer • Appreciate the value of communication skills • Communicate in a variety of ways • Be able to undertake task analysis • Attain the requisite techniques for job instruction • Be capable…
Find out more »Basic Electrical Skills Training
This three day course includes both theory and practical content and is relevant to those people who may be required to multi-task in the workplace e.g. those who carry out maintenance work. Delegates will have an overview of current Electricity at Work Regulations and Approved Code of Practice and will be taught basic electrical tasks that they can carry out safely whilst being fully aware of their limitations. Candidates who complete the course will be awarded with a Training Solutions…
Find out more »City & Guilds 18th Edition Training
This 18th Edition qualification is primarily aimed at practicing electricians with relevant experience and other allied professionals to update and enhance their understanding of IEE Wiring Regulations. It is intended to ensure that individuals are conversant with the format, content, and application of the Requirements for Electrical Installations BS 7671 2018; 18th Edition Wiring Regulations. An agreement was made between all awarding organisations and the JIB that all those sitting an exam based on BS 7671-2018 should be able to understand…
Find out more »IOSH Safety, Health, Environment for Construction Site Managers
This course is intended for managers and senior site staff who are required to manage efficiently in compliance with both the organisations safety policy and current health and safety legislation. Upon completion of the course the delegates who meet the CEF criteria, may apply to the CEF for the appropriate card. (please contact Donna or Josie for further information on the criteria that must be met) Course content Foundations of health and safety Hazard identification The risk assessment process…
Find out more »ILM Train the Trainer – 3 Day
ILM Endorsed Train the Trainer is an excellent course for those who deliver in-house training. Following satisfactory completion of this three day course programme, the delegates will be able to: • Be aware of the learning process • Be able to fill the role of a workplace trainer • Appreciate the value of communication skills • Communicate in a variety of ways • Be able to undertake task analysis • Attain the requisite techniques for job instruction • Be capable…
Find out more »ILM Endorsed Manual Handling Instructor – 5 Day
ILM Endorsed Manual Handling Instructor is an excellent course for those who deliver in-house training. Following satisfactory completion of this three day course programme, the delegates will be able to: • Be aware of the learning process • Be able to fill the role of a workplace trainer • Appreciate the value of communication skills • Communicate in a variety of ways • Be able to undertake task analysis • Attain the requisite techniques for job instruction • Be capable…
Find out more »February 2022
Nebosh General Certificate
NEBOSH National General Certificate in Occupational Safety & Health This is an externally examined level three qualification designed to help non-specialists to discharge more effectively their duties or functions in workplace Health & Safety. The course is delivered one day per week for ten weeks followed by the examinations. The assessments consist of one online open book examination NG1 and a practical assignment NG2. Both of which are marked by Nebosh. The qualification is designed for managers, supervisors or workers…
Find out more »Safe Pass Alliance (SPA) – 2 Day course
The Safety Pass Alliance Passport scheme was developed by UK’s leading authority in health and safety to ensure that persons working on petrol forecourts are aware of the potential hazards and have a good understanding of health and safety in this unique environment. Many of the large petrol retailers such as Shell, BP, Exon, Co-op/Summerfield and Texaco endorse this scheme. Training Solutions NI Limited are the only provider of this training in Ireland. This is a two day course which…
Find out more »CSR 1 Day – Health & Safety
The CSR scheme aims to raise health and safety standards and reduce risks and accidents in the construction industry, by assuring that all construction employees undertake health and safety training every four years. Applicants receive a photographic identity card which provides proof of their health and safety training and their skills and qualifications if appropriate. All applicants must undertake health and safety training and skills assessment if applicable. Please contact Donna or Josie for further information. Training Solutions backs up…
Find out more »IOSH Managing Safely General
IOSH Managing Safely is an excellent risk management based health and safety course which is suitable for all working environments. It is delivered one day per week for three weeks and covers; The foundations of health and safety Hazard identification The risk assessment process from start to finish Risk control, covering the hierarchy of risk control Overview of current legislation Understanding the implications of common hazards in the workplace. Accident investigation Measuring performance. Safety in the workplace is not…
Find out more »City & Guilds 2919-01 – Electric Vehicle Charging Equipment Installation
City & Guilds 2919-01 Electric Vehicle Charging Equipment Installation The qualification aims to provide expert guidance to learners wishing to gain knowledge and understanding on Electric Vehicle charging equipment installation. The course is for experienced electricians and installers who wish to install domestic, commercial and ‘on street’ charging points. The course covers key skills to install, fault find, inspect and test electric vehicle charging points. The course assessment consists of 2 sections. 2919-601 – Online multiple-choice questions paper 2919-301…
Find out more »CSR 1 Day – Health & Safety
The CSR scheme aims to raise health and safety standards and reduce risks and accidents in the construction industry, by assuring that all construction employees undertake health and safety training every four years. Applicants receive a photographic identity card which provides proof of their health and safety training and their skills and qualifications if appropriate. All applicants must undertake health and safety training and skills assessment if applicable. Please contact Donna or Josie for further information. Training Solutions backs up…
Find out more »City And Guilds PAT 2377-77 – 2 Day
Coming into contact with live electricity is a very serious hazard which could result in a fatality. The Health and Safety at Work (NI) Order 1978 places a legal duty on employers to provide safe and properly maintained work equipment. Regulation 5 of the Provision and Use of Work Equipment Regulations 1998 states; (1) Every employer shall ensure that work equipment is maintained in an efficient state, in efficient working order and in good repair. (2) Every employer shall ensure…
Find out more »NEBOSH Health & Safety Management for Construction
Course details Learners will be better able to influence their on-site colleagues to work more safely; because they will gain the confidence and technical know-how to challenge unsafe behaviours and offer practical solutions. Aligned to CDM regulations, NEBOSH Health and Safety Management for Construction (UK) is guided by legislation but focussed on best practice. The broad syllabus includes: CDM roles and responsibilities Health and safety culture Assessing risk Managing change Excavation Demolition Mobile plant and vehicles Working at height Musculoskeletal…
Find out more »City & Guilds 18th Edition
This 18th Edition qualification is primarily aimed at practicing electricians with relevant experience and other allied professionals to update and enhance their understanding of IEE Wiring Regulations. It is intended to ensure that individuals are conversant with the format, content, and application of the Requirements for Electrical Installations BS 7671 2018; 18th Edition Wiring Regulations. An agreement was made between all awarding organisations and the JIB that all those sitting an exam based on BS 7671-2018 should be able to understand…
Find out more »IOSH Safety for Executives & Directors
This course is intended for personnel who operate at strategic levels within an organisation that employs in excess of 50 people whose decisions can directly affect the health, safety and welfare of the workforce that works for them The Health and Safety at Work (NI) Order 1978 states ‘it is the duty of every employer to ensure ‘so far as is reasonably practicable’ the health, safety and welfare at work of all of his employees’. Employees also have a legal…
Find out more »CSR Site Supervisor Refresher
This is a one day course for supervisors and managers that need to renew their Supervisors CSR Card. On completion of the course we can apply to CEF for the issue of a new CSR Supervisors Card As part of the course you will have to complete the Health Safety and Environment test for Supervisors. We have the facilitate to complete that on the day at our premises. You must ensure that your card is no longer than six months expired…
Find out more »March 2022
City & Guilds 2391-52 Inspection and Testing
City and Guilds 2391-52 Inspection and Testing 2391 – 50 – Level 3 Award in Initial Verification and Certification of Electrical Installations 2391 – 51 – Level 3 Award in Periodic Inspection and Certification of Electrical Installations. 2391 – 52 – Combination of both the 2391-50 and 2391-51 In order to meet the criteria to be graded as a JIB Approved Electrician, you will require both 2391-50 and 2391-51 qualifications. To achieve this we offer the combination course 2391-52 which…
Find out more »Basic Electrical Skills Training
This three day course includes both theory and practical content and is relevant to those people who may be required to multi-task in the workplace e.g. those who carry out maintenance work. Delegates will have an overview of current Electricity at Work Regulations and Approved Code of Practice and will be taught basic electrical tasks that they can carry out safely whilst being fully aware of their limitations. Candidates who complete the course will be awarded with a Training Solutions…
Find out more »Nebosh Certificate In Fire Safety And Risk Assessment
NEBOSH qualifications are highly regarded in all industry. The syllabus for each qualification covers a comprehensive amount of information to enable Health and Safety managers and others to play their role in making the workplace a safer place. A fire in the workplace can have catastrophic repercussions, not only the risk to life and limb, but also the devastation it can cause for some businesses. Many businesses do not survive a serious fire! The Fire Service ask us all of…
Find out more »CSR 1 Day Health & Safety
The CSR scheme aims to raise health and safety standards and reduce risks and accidents in the construction industry, by assuring that all construction employees undertake health and safety training every four years. Applicants receive a photographic identity card which provides proof of their health and safety training and their skills and qualifications if appropriate. All applicants must undertake health and safety training and skills assessment if applicable. Please contact Donna or Josie for further information. Training Solutions backs up…
Find out more »CSR Site Safety Supervisor 4 Day
This course is intended to give Site Supervisors or anyone who has the day-today responsibility of supervising safety on construction sites a clear understanding of how health and safety affects their role and practical steps they can take to ensure a safe site. The course will consist of 4 days classroom based training and an online health, safety and environment supervisor test which is done on the last day of the course. The course is normally ran one day per…
Find out more »City & Guilds 2919-01 Electric Vehicle Charging Equipment Installation
City & Guilds 2919-01 Electric Vehicle Charging Equipment Installation The qualification aims to provide expert guidance to learners wishing to gain knowledge and understanding on Electric Vehicle charging equipment installation. The course is for experienced electricians and installers who wish to install domestic, commercial and ‘on street’ charging points. The course covers key skills to install, fault find, inspect and test electric vehicle charging points. The course assessment consists of 2 sections. 2919-601 – Online multiple-choice questions paper 2919-301…
Find out more »IOSH Safety, Health Environment for Construction Site Managers
This course is intended for managers and senior site staff who are required to manage efficiently in compliance with both the organisations safety policy and current health and safety legislation. Upon completion of the course the delegates who meet the CEF criteria, may apply to the CEF for the appropriate card. (please contact Donna or Josie for further information on the criteria that must be met) Course content Foundations of health and safety Hazard identification The risk assessment process…
Find out more »CSR Site Safety Supervisor Refresher
This is a one day course for supervisors and managers that need to renew their Supervisors CSR Card. On completion of the course we can apply to CEF for the issue of a new CSR Supervisors Card As part of the course you will have to complete the Health Safety and Environment test for Supervisors. We have the facilitate to complete that on the day at our premises. You must ensure that your card is no longer than six months expired…
Find out more »